Tragbarer HiFi-DAC-Verstärker Digital-Analog-Audio-Wandler RCA

Product Features: Digital Converter This DAC Converter Converts Coaxial or Toslink Digital Audio Signals to Left/Right Audio and Can Be Connected to External Devices Such as Amplifiers via a Standard RCA-Type Jack, You Can Also Choose 35 mmHeadphonesJackOutputConnectHigh-FidelityHeadphonesItsIdealforHomeorProfessionalAudioSwitching Bidirectional Switch Bidirectional Switch Design Makes It More Than A DAC Converter, Note Only Supports Digital to Digital, Also Supports Digital to Digital Support Toslink to Coaxial and Coaxial to Toslink Please Note: This Converter Supports Digital to Digital But Note Supports Digital to Digital SupportsVolumeadjustmentBuilt-inHigh-fidelityAmplifierChips,Left/Rightand3.5 mmOutputCandrive16~150 ohmsimpedanceHeadphones/SoundSupportsVolumecontrolVolumecontrolKnobJustforAdjustingtheVolumeoftheHeadphonesinterfaceandRCAinterfaceNoteforCoaxialorToslink Plug and Play Comes with 4.0 OD Optical Cable, Coaxial Cable and Power Adapter, No Need to Install Extra Programs, Just Plug and Play Note: This Converter Does Not Support 5.1 Channel Support Such as Dolby and DTS; Please Set the Audio Output to PCM or LPCM Before Using; PS4 Pro and PS4 Slim Cannot Use This Converter 192KHzSamplingrateAchievedWithVolumeKnob,YouCanadjusttheVolumeofRCALeft/Right+3.5 mmJackAudioOutputConvenienttouseNote:CAN'TcontroltheToslinkorCoaxialAudioOutputItactuallysupportssamplingratesat32,44.1,48,96,and192kHz,and24-bitS/PDIFincomingbitstreamonleftandrightchannels Note: 1. There is a power switch on the volume knob, please turn on the power switch before using the DAC 2. Please set the audio output to PCM/LPCM format 3. For Samsung, if there is no sound even when you set the audio output to PCM/LPCM format, please turn ON the external speakers by going to Menus-Sounds- Speaker Setup- HESB/external speaker-ON 4. This converter does not support 5.1 channel systems such as Dolby and DTS 5. PS4 Pro and PS4 Slim CANNOT use this converter r as tgey haven't Optical fiber output interface Pro duct Specification: Audio Adapter/Converter Type Aluminum Material Input interface Toslink, Coaxial Output interfaces R/L RCA, Toslink, Coaxial, 3.5mm Signal Sampling Rate 32-192 KHz, Bit Rate 16-24 Bits Output Impedance 16-300 ohms Working Voltage 5V Portable Hifi DAC Amp Digital To og Audio Converter RCA 3.5mm Headphone Amplifier Toslink Optical Coaxial Output DAC 24bit