MPPT PWM Solarregler 70A 50A 30A LCD-Display Solar-PV-Laderegler 12V 24V Batterie Intelligenter Regler Dual USB

70A/50A/30A MPPT Solar Charger Controller- Solar Panel Battery Regulator LCD Display with Dual USB Port Display 12V/24V Safe Protection Safe Protection Features: --PROTECTION FUNCTION: Built-in over voltage protection, short circuit protection, over load protection, overcharge protection, over-discharge protection improves system efficiency and battery life. --STORAGE FUNCTION: The solar charge controller helps you record the total run time of system, timers of error during running time, times of full charged battery, which offers reliable working storage. Specifications: Current: 30A, 50A (optional) Rated Voltage: 12/24V USB Output: 2.4A *2 Over Charge Current(V): 13.7V/*2 24V Over Discharge Current(V): 10.5-11V/*2 24V Temperature Compensation: -3mv/℃/cell Empty Load Wastage: <45mA Loop Voltage Drop: <200mv Display: LCD Display Charging Type: MPPT Waterproof Grade: IP32 Material: Plastic Color: Black + Orange Size: 17.5 * 14 * 4cm/6.9 * 5.5 * 1.6in(30A), 21 * 19.2 * 5.5cm/8.3 * 7.6 * 2.2in(5A) Package Weight: 480g-868g Package List: 1 * Solar Charge Controller 1 * User Manual Notes: 1. It is high quality compatible MPPT + PWM Solar Controllers ,not 100% Ture MPPT 2. When the battery voltage is too low, the controller stops the output; after the solar panel is charged, the cell recovers to 12.6V. 3. 12.6V is the recovery discharge voltage. 4. The normal voltage of the controller is 10.7V to 13.7V. These two voltage fluctuations can be set manually. If you have trouble in use, try adjusting the float voltage to 13.7V: First, you need to press the MCU control button for about 3-4 seconds, and then there will be a management interface on the screen. Second, you must press the add button on the screen until the voltage reaches 13.7V. Finally, you need to press the MCU control button again, which will save the controller record data when the display does not flicker.